[et_pb_section fb_built=”1″ _builder_version=”4.9.3″ _module_preset=”default”][et_pb_row _builder_version=”4.9.3″ _module_preset=”default”][et_pb_column type=”4_4″ _builder_version=”4.9.3″ _module_preset=”default”][et_pb_accordion _builder_version=”4.9.3″ _module_preset=”default” custom_css_main_element=”display: none; ||”][et_pb_accordion_item title=”ARCH TOP” open=”on” _builder_version=”4.9.3″ _module_preset=”default”]

MEASURING – INSIDE MOUNT

First, measure the base width inside the arch opening.

Then measure the height at the middle (tallest) point inside of the arch opening.

Other suggestions:

Keep in mind that if you are ordering an arch, the height of your arch must be half the width. You will have a perfect semi-circle. If your window arch is not perfect, please call us to discuss your options (416-721-1002).

[/et_pb_accordion_item][et_pb_accordion_item title=”DRAPERY” _builder_version=”4.9.3″ _module_preset=”default” open=”off”]

1. Select Panel Quantity

2. Select Finished Length

Note: We recommend installing the hardware 8″ above the window opening.

Grommet Panels:
  • Measure from the top of the pole to the floor.
  • Add 1-1/2″ to this measurement for Grommet Placement.
  • Add additional length for Puddling if desired. (See Puddling Guide below)
Flat Panels &
Pleated Panels:
  • Measure from the bottom of the drapery ring to the floor.
  • Add additional length for Puddling if desired. (See Puddling Guide below)

3. Select Finished Width

Puddling Guide – If you prefer for your drapes to Puddle here are some general guidelines:

Minimal Puddle – Small break in the fabric where it meets the floor.
Add 1” – 3” to your length
Moderate Puddle – More dramatic break with some fabric resting on the floor.
Add 3” – 6” to your length
Opulent Puddle – Generous amount of fabric pooling on the floor.
Add 6” – 8” to your length

[/et_pb_accordion_item][et_pb_accordion_item title=”DRAPERY” _builder_version=”4.9.3″ _module_preset=”default” open=”off”]

1. Select Panel Quantity

2. Select Finished Length

Note: We recommend installing the hardware 8″ above the window opening.

Grommet Panels:
  • Measure from the top of the pole to the floor.
  • Add 1-1/2″ to this measurement for Grommet Placement.
  • Add additional length for Puddling if desired. (See Puddling Guide below)
Flat Panels &
Pleated Panels:
  • Measure from the bottom of the drapery ring to the floor.
  • Add additional length for Puddling if desired. (See Puddling Guide below)

3. Select Finished Width

Puddling Guide – If you prefer for your drapes to Puddle here are some general guidelines:

Minimal Puddle – Small break in the fabric where it meets the floor.
Add 1” – 3” to your length
Moderate Puddle – More dramatic break with some fabric resting on the floor.
Add 3” – 6” to your length
Opulent Puddle – Generous amount of fabric pooling on the floor.
Add 6” – 8” to your length

[/et_pb_accordion_item][/et_pb_accordion][et_pb_accordion _builder_version=”4.9.3″ _module_preset=”default” hover_enabled=”0″ sticky_enabled=”0″][et_pb_accordion_item title=”ARCH TOP” _builder_version=”4.9.3″ _module_preset=”default” custom_css_main_element=”display: none; ||” open=”on”]

MEASURING – INSIDE MOUNT

First, measure the base width inside the arch opening.

Then measure the height at the middle (tallest) point inside of the arch opening.

Other suggestions:

Keep in mind that if you are ordering an arch, the height of your arch must be half the width. You will have a perfect semi-circle. If your window arch is not perfect, please call us to discuss your options (416-721-1002).

[/et_pb_accordion_item][et_pb_accordion_item title=”ARCH TOP” _builder_version=”4.9.3″ _module_preset=”default” open=”off”]

MEASURING – INSIDE MOUNT

First, measure the base width inside the arch opening.

Then measure the height at the middle (tallest) point inside of the arch opening.

Other suggestions:

Keep in mind that if you are ordering an arch, the height of your arch must be half the width. You will have a perfect semi-circle. If your window arch is not perfect, please call us to discuss your options (416-721-1002).

[/et_pb_accordion_item][et_pb_accordion_item title=”DRAPERY” _builder_version=”4.9.3″ _module_preset=”default” open=”off”]

1. Select Panel Quantity

2. Select Finished Length

Note: We recommend installing the hardware 8″ above the window opening.

Grommet Panels:
  • Measure from the top of the pole to the floor.
  • Add 1-1/2″ to this measurement for Grommet Placement.
  • Add additional length for Puddling if desired. (See Puddling Guide below)
Flat Panels &
Pleated Panels:
  • Measure from the bottom of the drapery ring to the floor.
  • Add additional length for Puddling if desired. (See Puddling Guide below)

3. Select Finished Width

Puddling Guide – If you prefer for your drapes to Puddle here are some general guidelines:

Minimal Puddle – Small break in the fabric where it meets the floor.
Add 1” – 3” to your length
Moderate Puddle – More dramatic break with some fabric resting on the floor.
Add 3” – 6” to your length
Opulent Puddle – Generous amount of fabric pooling on the floor.
Add 6” – 8” to your length

[/et_pb_accordion_item][et_pb_accordion_item title=”FABRIC VALANCE” _builder_version=”4.9.3″ _module_preset=”default” open=”off”]

1. Determine Valance Width
Allow a minimum clearance of 1” each side of whatever the valance is mounted over plus an additional width to accommodate any brackets or operating cords of existing window coverings (blinds or drapes) on the window.

2. Determine Valance Height
Height is mostly determined by the scale of the window or the undertreatment (i.e. drapes or blinds) covering the window. Generally, allow 15% to 18% of the height of the undertreatment, or the distance from the top of the valance to the floor.

3. Determine Valance Return Size
Valance Return Size is determined by the projection of the undertreatment to make sure it won’t interfere with the operation of the covering. The chart below gives minimum return requirements for most situations.

UNDERTREATMENT VALANCE RETURN
Window with no undertreatment or
Window with inside mount undertreatment
1-1/2” return
1” mini-blind 2-1/2”
2” mini-blind 3-1/2”
3-1/2” vertical blind 5-1/2”
Honeycomb shade 2-1/2”
Honeycomb shade, double cell 3-1/2”
Single-layer drapery 5-1/2”

[/et_pb_accordion_item][et_pb_accordion_item title=”BLINDS AND SHADES” open=”off” _builder_version=”4.9.3″ _module_preset=”default”]

Inside Mount Instructions

MEASURING – INSIDE MOUNT

Outside Mount Instructions

MEASURING – OUTSIDE MOUNT

[/et_pb_accordion_item][et_pb_accordion_item title=”SHUTTERS” _builder_version=”4.9.3″ _module_preset=”default” open=”off”]

MEASURING

[/et_pb_accordion_item][/et_pb_accordion][/et_pb_column][/et_pb_row][/et_pb_section]